Plywood Boards for Facades

Plywood Boards

Our warehouse in Gratwein with Okoume Aquagarant

Birke Combi phenol-formaldehyde resin coated (see Birch Coated) can only be used conditionally for facades – see our guidelines for outdoor use.

Bryunzeel Guarantee Plywoood

Bryunzeel Guarantee Plywood for large-area, natural facades that don’t turn grey. Save yourself the trouble. Choose our easy to care for plywood from Okoume, which has been tried and proven for decades.

• Absolutely water and weather resistant.
• Elastic Bryunzeel exterior laminating prevents stress and cracks.
• 10 year glue guarantee.
• Selected Okoume veneer from environmentally sound forestry and careful processing in Holland.
• Surface veneer 1.5 mm before sanding, from a single sheet.
• Low coefficient of expansion of approx. 0.3 %.
• Very light, which means more economical installation (approx. 550 kg/m³).
• The high strength allows for greater span lengths.
• Easy to process material; tool friendly.

Surface Treatment

• Lightly sand and remove surface dust with a brush. Then apply primer (edges twice) and two to three coats for a glazed finishing of 100 to 120 mu, dry
• Impregnate edges and drill holes well and paint at least twice.
• Maintenance interval for pigmented varnishes is five to six years. We recommend: annual checks, cleaning, and patching if necessary. The normal breakdown of the paint coat is usually greater on the west side (10 to 20 mu per year).

Formats and Thicknesses

Please Observe

• Board distance at least 10 mm and at least 20 mm back ventilation space
• Enough distance from the ground (due to water spray and snow)
• Use rust-free screws with washers
• Round and bevel edges on top and bottom (edges break).
• An additional cover profile is recommended for the upper edge